September 2012 IPV6828
There are some special functions only for administrator as below:
Figure 4.6
3.1 Multi-Device Settings
Î
Multi-Device Settings
This camera can support max. 9 device channels at the same time.
3.1.1 Set Multi-Device in LAN
In the Multi-Device Settings page, you can see all devices searched in LAN. The 1st device is the default one.
You can add more cameras listed in LAN for monitoring. This web software supports up to 9 IP Cameras online
simultaneously.
Click The 2nd Device and click the item in the Device List in Lan, it will fill the Alias, Host, Http Port
automatically, then input the correct user name and password, click Add. Set more devices in the same way,
after you’re done, click Submit.
To Next Page
Loading...