September 2012 IPV6844
Î
Figure 6.8
Select it and click Submit, then the camera will support UPnP port forwarding automatically.
It’s helpful for using DDNS (viewing live video from outside our network). As soon as you have enabled UPnP in
you router, please proceed with the next steps.
Figure 6.9
NOTE: UPnP is only for port forwarding. It relates to the security settings of your router, make sure the UPnP
function of your router is enabled, before you continue. If your router does not support UPnP, it may show
error information, therefore we recommend you to do port forwarding manually in your router, as explained
in step 3.7.3.
3.7 DDNS Service Settings
Î
Select Network > DDNS Service Settings in the Tree View on the left (see picture above)
There are 2 options:
Manufacturer’s DDNS: This domain is provided with the Camera (see bottom of the camera). Choose ‘submit’.
In most cases you will need to login to the camera again. You can use the IPCamera tool for this or enter the
Camera`s IP address in your web browser. After you have done this, please skip the next step and continue
with step 3.7.1
Third Party DDNS: You might have a DDNS server already, then it is useful to take the next steps.
This domain is provided by the third party, such as Dyndns, Oray, 3322 etc.
To Next Page
Loading...