September 2012 IPV6858
Click System—Device Info to check the MSN status.
After you run your MSN, open the chat dialog, type in the word “url?”, after a few seconds, you will get a
reply for the remote access IP address for this IP camera.
3.15 Other Settings
Î
Figure 9.0
Here you can configure some additional functions such as Motion Detection, Alarm, IO Linkage, Schedule,
FTP Upload, Alarm Mail Alert, Record Path, etc.
3.16 Mail Service Settings
Set Mail Service Settings to enable the camera to send e-mail alerts when motion is detected.
To Next Page
Loading...