ECA CONFEO PREMIX P 24 HM - 9- CONNECTIONS; 9.1- Condensate Discharge Connection

8. AP MODE
The device switches to AP mode under four di󰀨erent conditions.
1. When the device is plugged and operated for the first time;
2. When the E03 (extreme temperature warning) error is reset manually;
3. When the water pressure in the CH circuit exceeds the limit level and after F37-F40 errors;
4. When the F42 (Low water pressure error after automatic water filling) error is reset manually.
Figure 8 Figure 9
Figure 10
19