ECG DS 1010 - Page 7

DISINFECTION DISPENSER English
7
DISINFECTION DISPENSER English
1. Connect the USB -C connector of the
supplied cable to the USB -C connector on
the dispenser 5.
2. Plug the other end of the cable into the
charger or USB computer port.
3. When the indicator lights up continuously,
charging is complete.
Note:
You can use the dispenser while charging.
It takes approximately 3 hours to charge
afully discharged battery.
USE
1. Grasp the disinfection container by both
sides and remove it.
2. Unscrew the inner glass vial by turning it
counterclockwise and pull the foam stick out
of it.
3. Fill the glass vial with disinfectant.
4. Insert the foam stick into the vial and screw
it back in by turning it clockwise. Put the
disinfection container back on the body of
the dispenser.