Echo CS-3000 TYPE 1E - SERIAL NUMBER 2994 - 4033 User Manual

15
SPARK PLUG
• Check periodically
• Gap = 0.65mm (.026”)
• Replace if either electrode is worn, or if the insulator is
fouled by oil or other deposits.
• Torque = 145 – 155 kg*cm (125 – 135 in. lb.)
CAUTION: Do not over-torque.
COOLING SYSTEM CLEANING
• Remove spark plug lead.
• Remove two (2) guide bar cover nuts and guide bar
cover.
• Remove four (4) recoil starter housing screws and
starter housing.
• Use a stiff bristle cleaning brush (do not us a metal
brush) to remove dirt from cylinder fins in muffler and
ignition coil areas.
CARBURETOR ADJUSTMENT
ENGINE BREAK-IN
New engines must be operated a minimum duration of two
tanks of fuel break-in before carburetor adjustments can be
made. During the break-in period your engine performance
will increase and exhaust emissions will stabilize. Idle speed
can be adjusted as required.
HIGH ALTITUDE ADJUSTMENT
High altitude adjustment is not required for proper operation
of this engine.

Echo CS-3000 TYPE 1E - SERIAL NUMBER 2994 - 4033 Specifications

General

Displacement	30.1 cc
Engine Type	2-stroke
Chain Pitch	3/8 in.
Chain Gauge	0.050 in.
Bar Length	14-16 inches
Fuel Tank Capacity	300 ml
Oil Tank Capacity	200 ml
Guide Bar Length	14-16 inches