Echo CS-400 - Starting a Warm Chainsaw Engine

SPANNER -- 10mm.....29
SPANNER -- 17X19mm.....29
SPANNER -- 8X10mm.....29
SPARK PLUG -- BPM-8Y.....13
SPARK PLUG -- BPMR-8Y.....13
SPRING.....11, 15
SPRING PIN 4X30.....25
SPRING, CHOKE RETURN.....7
SPRING, CLUTCH.....19
SPRING, IDLE ADJUST.....7
SPRING, METERING LEVER.....7
SPRING, RETURN.....11
SPRING, THROTTLE RETURN.....7
SPRING, TRIGGER RETURN.....25
STARTER ASY.....11
STUD, GUIDE BAR.....25
SWITCH, IGNITION.....5
T
TAPPING SCREW 4X12.....15
TENSIONER, CHAIN.....15
TERMINAL, LEAD - GROUND.....5
TERMINAL, SPARK PLUG CAP.....13
TRIGGER, THROTTLE.....25
TUBE.....5
V
VALVE, CHECK.....25
VALVE, CHOKE.....7
VALVE, INLET NEEDLE.....7
VALVE, THROTTLE.....7
VENT ASY.....25
W
WASHER.....5, 7, 15
WASHER 5.....11
WASHER, CLUTCH.....19
WOODRUFF KEY.....13
WRENCH/SCREWDRIVER -- 10X19mm.....29
WRENCH/SCREWDRIVER -- 13X19mm.....29
WRENCH/SCREWDRIVER -- 17X19mm.....29
99922204126 - 32 - REVISED 08/10/07
Table of Contents Part Number Index
Part Description Index (continued)