Pairing the Receiver
1）Enter into pairing mode：
Ensure the receiver is turned off, otherwise turn it off first and then Press
and hold the MFB button for 3 seconds. The LEDS flash red and blue
alternatively.
Noted:
The pairing mode will last 5 minutes, the receiver “Echo-RX01” will
switch to standby mode automatically if no devices connected within 5
minutes.
2）Pairing the Mobile Phone
1-Set the receiver into pairing mode
2-Activate your mobile phones’ Bluetooth function, then search for Bluetooth
devices within range, select “Echo-RX01” from the list of devices shown.
And they will be connected automatically.
3-After connected successfully, the LED flashes blue once every 3 seconds.
Noted:
◆ If no device connected with “Echo-RX01” within 20 minutes, the receiver
will turn off automatically in order to save power.
◆ After successful pairing, the receiver and the mobile phone will remember
each other, they will not need to be re-pair next time.
Music Pause/Play
Connect “Echo-RX01” to any speaker and a Bluetooth music device at the
same time, now you can enjoy music wirelessly.
Playing/Pausing music: Short press MFB button once
LED indicator
Pairing mode: LED flashes red and blue alternately
Standby mode and not connected: LED flashes Blue once every 2 seconds
Connected: LED flashes Blue once every 3 seconds
Low Battery: LED flashes Red once every second
Clear the pairing list:
Press and hold the power button for 10 seconds until the blue and red LED
flash together.
To Next Page
Loading...