guidelines (ICNIRP
1
) on exposure to radio
frequencies. These guidelines, which are based on
various studies and research, have been
developed by independent scientific
organisations to ensure the safety of
everyone who usesa mobile phone.
The safety information on exposure to radio
waves uses a unit of measurement known as SAR
(Specific Absorption Rate). The international
guidelines have set this limit at 2W/kg*. The phone
is used in standard operating positions when being
tested for its SAR.
1
International Commissionon Non-Ionising RadiationProtection
In addition, all models of phone must undergo tests
beforebeing marketedto ensure compliancewith the
European R&TTE directive.
This directive publishes strict rules for guaranteeing
the safety of users and for preventing any risks
to health.
The maximum SAR value tested on this device
when used in its normal position at the ear is
TBDW/kg and TBDW/kg when used close to the
body, at a minimum distance of 5 mm. The device
complies with RF specifications when used near
your ear or at a distance of 5mm from your body.
The device uses a high-quality network
connection for transmitting files, data and
messages. On occasion, the transmission of files
or messages may be delayed until the
connection is available. When this is the case, be
sure to follow the instructions regarding the
separation distance for establishing the
transmission. If you use a case,
Although the SAR is determined using the
highest power level, the phone’s real rate of
specific absorption whilst in operation may be well
below the maximum value.
A phone is designed to operate at different
power levels so that it only uses the power it
needs to be connected to the network.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
