Figure 16
CAUTION: Do not place chain on saw backwards. If chain is backwards, saw
will vibrate badly and will not cut.
STORAGE
If storing saw for more than 30 days, follow steps below.1. Drain oil tank after each
use.
2. Remove and clean guide bar and chain. Clean guide bar and chain by soaking in
petroleum based solvent or mild soap and water mixture.
3. Dry guide bar and chain.
4. Place chain in container filled with oil. This will prevent rust.
5. Wipe a thin coating of oil over surface of guide bar.
6. Wipe off outside of saw body. Do this with soft cloth dampened with a mild soap
and water mixture.
7. Store chain saw
• in a high or locked place, out of children's reach
• in a dry place
GUARANTEE:
This product is guaranteed for a period of 12 months from date of purchase. Any
modification or misuse of this machine will invalidate your guarantee. Your statutory
rights remain unaffected.
Imported by T2 Direct Ltd - London
To Previous Page
Loading...
