7. Insert long mast through main boom and into
the hull. Ensure the mast screw engages the
main boom slot.
6 / 16
8. Connect long mast, forestay fitting part and
short mast together.
10. Assembly should look like the drawing above.
Please note that the sail does not need to be
connected to the rear mounts of the swivel.
45mm
210mm
120mm
15mm
65mm
110mm
165mm
9. Raise the sail and place the plastic swivel
on top of the short mast. Insert the metal
backstay crane through the swivel and into
the mast.
Your Eclipse 650 sailboat comes with the sails already attached to the main and jib boom.
These drawings are only a reference as to the approximate location of the silicone rings.
SR1
SR2SR3
SR4SR5SR6
SR7
To Next Page
Loading...