PAGE 3
CLOVER CRIB ASSEMBLY MANUAL ©2014 Eco-Chic Baby
®
USE OF A POWER TOOL TO ASSEMBLE THIS CRIB MAY STRIP THE WOOD. PLEASE DO NOT USE.
3.)
Choose the level to install mattress support. Mattress is shown in its lowest position for
illustration purposes only. Attach mattress support using four C 1-1/8” bolts and four F
Locking washers using E Hex wrench.
E
C
F
IMPORTANT: Be sure to lower the mattress
support as your child grows older.
Allen Head Bolt 1-1/8" (4pcs)
C
Locking Washers (4pcs)
F
HARDWARE NEEDED:
To Next Page
Loading...
