Need help?Do you have a question about the ECO-WORTHY US-L03NBM100V-1 and is the answer not in the manual?
General| Brand | ECO-WORTHY |
|---|---|
| Model | US-L03NBM100V-1 |
| Category | Monitor |
| Language | English |
Features a 3.5-inch true color touch screen display for user interaction.
Utilizes a Hall sensor for non-invasive measurement, ensuring convenience and safety.
Displays voltage, current, power, capacity, percentage, and energy for complete monitoring.
Provides visual alarms by flashing numbers for over-voltage, over-current, or under-voltage conditions.
Measurement data transmitted via RS485; display power can be disconnected without data loss.
Connects Hall sensor to display using RS485 A/B and power supply cables.
Connects display to battery via monitor-battery cable for data acquisition.
Indicator lights signal successful (blue/green) or failed (blue only) data communication.
Shows detailed charge/discharge status, battery percentage, voltage, current, capacity, and energy.
Presents key battery information like percentage, capacity, voltage, and current concisely.
Visualizes parameter trends over time with customizable red, yellow, and blue curves.
Navigate display pages, adjust screen brightness, and set auto-sleep time.
Access to the 'PARAME' page requires the default password '2016'.
Configure basic parameters (address, capacity) and alarm thresholds (voltage, current).
Steps to read, modify, and write parameter values for accurate monitoring.
Options to set monitoring data to full capacity or clear current data.
Corrects current readings by zeroing the parameter when the battery is idle.
Set 'Nominal Capacity' and 'Full Capacity Voltage' for accurate battery monitoring.
Charge battery to full once to enable normal capacity display and power monitoring.
Adhere to voltage/current limits and correct polarity; avoid reverse connections for accurate measurement.
Operate in suitable environment, avoid physical shock, and do not attempt disassembly.
To Next Page