11
With Washer 1 still highlighted, the existing options for soft keys SK#1, #3 and #4 are again available.
However, SK#2 has changed to “Modify Formula”. Note the use of a pencil pictogram (rather than an arrow
for “Select Formula”).
Selecting SK#2 will give you the option of cancelling the current formula:
Press SK#2 <Yes> or SK#3 <No> to confirm your selection.
Press SK#1 <Back> to cancel.
If the formula is cancelled, the selected formula (F03) for this selected washer will be reset and all
doses will be removed from the system queue. The main idle screen on the Condor and the
Formula Select will display F00 No Program.
Select a Formula Screen: Formula Selection Error
If the formula selection cannot be successfully processed (caused by a communication failure or a delay in
system communication due to system synchronization), an error message will appear:
To Next Page
Loading...
