7.1.1 Pneumatic connection
Personnel:
n
Manufacturer
n
Mechanic
DANGER!
Hazards caused by pressurised components!
With improper handling, pressurised components can move uncontrollably and
cause severe injuries.
Liquid under high pressure can escape from pressurised components if
handled improperly or in the case of a defect. This can lead to severe or fatal
injuries.
Fig. 8: Compressed air supply / compressed air maintenance unit
1 Device socket, standard, Festo, article no. 418468065
2 Rotary knob with lock
3 Manometer, 1/8", 0 - 6 bar, article no. 415502555
4 Angle connector, 90 degrees, article no. 415101537
5 Angle connector, 90 degrees, article no. 415101536
6 FESTO filter regulator, G1/4, 0.5-12 bar, article no.
415503402
7 Condensate drain
8 Pipe, Ø 8 x 1, flexible PE, blue, article no. 417400355
9 Solenoid valve, 3/2 way, 24 V / DC, 3 W, article no.
417704357
10 Angle connector, 90 degrees, article no. 415101537
11 Muffler, 1/8" sintered bronze, article no. 415503619
Connection
DryExx connection overview®> Pneumatic connection
40Rev. 02-09.2017
To Next Page
Loading...
