Ecolab DryExxEco Advanced-ETH - System Settings [Signals] [Digital Inputs]

10.4.5.1 „System settings“ [Signals] [Digital Inputs]
In the „System settings“ [Signals] [Digital Inputs] the input bytes going into the control can
be monitored for commissioning and maintenance purposes.
Fig. 19: „Setup“ [Signals] [Digital inputs]
1. Button [Signals] Press to open the signal settings.
ð
The overview: „Manual activation / signal exchange“ is displayed.
2. Press button [Digital inputs] .
ð
The selection: „Monitoring digital inputs / signal exchange“ is displayed.
3. Press button [EB 0] / „integrated input bytes“.
ð
The selection: „Digital Inputs“ is displayed.
4. Press button [DBB 188 - 192] / „Ethernet input bytes“ .
ð
The screen „Digital inputs DBB 188 - 192“ is displayed.
Layout of the software display
System settings > Overview: System settings Signals
59 Rev. 02-09.2017