Ecolab DryExxEco Advanced-ETH - Archive] - [Archive Selection] - [Current Day]

10.6.1 [Archive] - [Archive Selection] - [current day]
The views of the screen are identical in the day, month and year archives.
Only plants where valves are allocated are displayed.
Fig. 29: Program structure - Archive of current day
Displays „Archive of current day“
1.
The „home screen“
Ä Chapter 10.3 „„home screen“ (start screen)“ on page 54 use
the
button to switch to the archive display.
ð
The screen switches to the archive selection display Fig. 28
.
2.
Press the button to select „Current Day“ .
ð
The screen switches to the section selection.
3.
The button (e.g. Filler 1) or (e.g. Filler 2) is used to select the
required section.
ð
The screen switches to the circuit selection.
4.
The button (e.g. lubrication circuit 1, or valve 1), (e.g. lubrication
circuit 2, or valve 2) or (e.g. lubrication circuit 3, or valve 3) is used to select
the required circuit.
5. The „Archive Display“ - „Archive of current day“ is displayed.
Fig. 30: Archive of current day
1 Section number
2 BS-Mittel = belt lubricant (Bandschmiermittel)
3 Booster = additional activation of the dosing outside
automatic mode.
4 Selection of the line for the operating time
5 Selection of the „Line units“ with the number of items
(unit counter, e.g. bottle counter
, crate counter, etc.).
6 Specification of the selected archive. In this case
„Archive of current day“
7 Selection of consecutive valve number
8 Circuit number
Layout of the software display
Overview: Archive > Archive - Archive Selection - current day
66Rev. 02-09.2017