18 05.10.2015 BA-21907-006-EN
EN
9.2. OTHER FAULTS
TYPE OF FAILURES POSSIBLE CAUSE REMEDY
Glasses are totally or partially
cloudy
Surface of glasses is rough and porous,
this is called glass corrosion
This is not caused by a malfunction on the machine.
Replace with new glasses.
Glass breakages. Use of inappropriate dish or glass racks. Use appropriate racks.
9.3. MALFUNCTIONS
TYPE OF FAILURES POSSIBLE CAUSE REMEDY
Machine suddenly stops dur-
ing wash program.
Machine is connected to an energy
management system which cuts out the
energy consumer at a given point, or ma-
chine is interlocked with another energy
consumer unit.
Connect machine separately (call electrician).
Blown site fuse. Check site fuses.
Temperature probe
rinse booster or tank defective.
Call the after sales service.
Pressure transmitter
rinse booster or tank defective.
Call the after sales service.
The four button LEDs ash. Control defective. Call the after sales service.
9. TROUBLESHOOTING GUIDE
To Next Page
Loading...