EasyManua.ls Logo

EcoMotion CITY 2019 User Manual

EcoMotion CITY 2019
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
USER MANUAL!
!
CITY
www.ecomotionbikes.com | contact@ecomotionbikes.com
© 2019 Ecomotion Bikes
Warning!
In order to ensure your safety and to get the most out of your
eBike, please read this user manual carefully before the first
use.
Question and Answer IconNeed help?

Do you have a question about the EcoMotion CITY 2019 and is the answer not in the manual?

EcoMotion CITY 2019 Specifications

General IconGeneral
FrameAluminum
ForkSteel
BrakesV-Brakes
Weight15 kg
GearsShimano 7-speed
Wheel Size26 inches
ColorBlack

Summary

General Safety Warnings

Accidents and Falls

Accidents and falls can cause severe injuries or death. Read manual and ensure e-bike is assembled and maintained.

Component Integrity

E-bike components wear out. Inspect for damage and replace expired parts to prevent injury.

Brake System Readiness

Check brakes before riding; ensure they work. Professional maintenance is advised.

Operational and Storage Warnings

Battery Storage Temperatures

Avoid extreme temperatures for battery storage to prevent corrosion, swelling, or explosion.

Assembly Safety

Improper assembly is dangerous. Contact us for clarification or use a professional bike shop.

Charger Inspection

Check battery charger for physical damage before charging. Do not use a damaged charger.

Usage Restrictions and Safety

Battery Charging Supervision

Do not charge battery unsupervised or overnight while people sleep.

Motor Shut-off System

Ensure motor shut-off system controlled by brakes operates correctly before each ride.

Assembly Instructions

Handlebar Installation

Open stem lever, place stem on fork's rod, and secure with top screw.

Handlebar Alignment and Locking

Align handlebar with fork, tighten stem screws, close lever. Ensure free steering.

Front Wheel Installation

Remove fork support rod/spacer. Slide wheel lock rod into hub, secure, and lock lever.

Brake-sets Adjustment

Ensure brake pads don't rub discs. Adjust caliper screws or sensitivity with Helen screw.

Handlebar Adjustment and Locking

Adjust handlebar angle/height via stem lever, then re-close lever to lock. Ensure security.

Battery Mounting and Dismounting

Use key to unlock/remove battery. Slide battery onto rail and lock. Ensure smooth movement.

Pre-Ride Inspection

Wheel and Handlebar Checks

Check wheels connect, rotate freely, no loose spokes. Ensure handlebar aligned and screws tight.

Bearing and Brake Checks

Verify bearings rotate freely, undamaged. Check brakes function and pads are not worn.

Display Operation

Powering On/Off

Turn battery on/off with its button. Turn display on/off by long-pressing the power button.

Battery Precautions and Care

Battery Handling Warnings

Do not perforate, drop, soak, or expose battery to extreme temperatures or strong fields.

Proper Battery Usage

Use battery only for intended purpose. Do not crush or disassemble it.

Battery Charging Procedure

Charging Steps

Ensure battery off. Plug charger to outlet, then battery. Red light=charging, green=full.

Charging Warnings

No covering during charging. Use original charger only. Terminate if battery overheats.

Battery Lifespan Preservation

Charging Cycle Management

Charge battery fully at least once every 20 charging cycles.

Uncharged Period Limit

Do not leave battery uncharged for over 24 hours to avoid unchargeable state.

Troubleshooting Guide