Need help?Do you have a question about the EcoSmart ES50LVP and is the answer not in the manual?
General| Model | ES50LVP |
|---|---|
| Type | Air Handler |
| Brand | EcoSmart |
| Phase | 1 |
| Maximum External Static Pressure | 0.8 in. W.C. |
| Cabinet Construction | Galvanized Steel |
| Voltage | 208/230V |
| Heating Capacity | 50, 000 BTU/h |
| Cooling Capacity | 50000 BTU |
| Filter Type | Standard |
Explains safety symbols, DANGER, WARNING, and CAUTION terms.
Covers installation, electrical, and hot water hazard warnings.
Describes the ecosmart hydronic furnace, its purpose, and capabilities.
Details operation in full modulation mode, typically with an outdoor sensor.
Explains step modulation mode, often used without an outdoor sensor.
Describes basic mode, simulating standard furnace operation.
Presents performance data, including BTUH capacities, for the ES50LVP model.
Presents performance data, including BTUH capacities, for the ES90LVP model.
Provides physical dimensions, supply air opening, and side return air data.
Lists ECM blower performance (CFM/amps) for ES50LVP and ES90LVP models.
Outlines the sequential steps for safely starting up the ecosmart system.
Specifies required clearances and advises on freeze protection.
Covers unit mounting, rear piping, and plumbing connections.
Discusses check valves, pumps, and connecting to water heaters/boilers.
Illustrates piping for a system using a tankless water heater.
Illustrates piping for a system using a combi-boiler.
Covers operating voltage, grounding, and making connections to quick connects.
Provides wiring instructions and diagrams for thermostat connections.
Presents the overall wiring diagram for the ecosmart unit.
Details connections for flow switches, boiler initiate, and accessories.
Identifies dip switch locations and how to set outdoor temperature.
Explains how to set heat CFM for ES90LVP and ES50LVP models.
Covers setting cool CFM and system parameters for both models.
Details operation in Full, Step, and Basic Modulation heating modes.
Explains cooling, dehumidification, fan modes, and freeze protection.
Explains the function and purpose of the pump exerciser.
Provides guidance on maintaining the filter, coils, fan, and motor.
Lists the steps for safely removing the control and blower assembly.
Addresses thermostat call errors and external pump issues.
Troubleshoots insufficient heat, cold water, and fan operation.
Provides details regarding the product's warranty period and where to find more information.
To Next Page
