Ecotech Marine RMS - User Manual

To Next Page

Tank Mount System

RMS

Mounting Instructions for Radion XR30 and XR15 LED Models

6. Spacer (optional)

5. Clamp Chop

4. Adjustment Screw

3. Formed Arm

2. X-Bracket

1. Sliding Rail

7. Edge Clamp

Make sure that all you have all components included in this kit before

beginning. If something is missing contact EcoTech Marine service at

1-800-785-0338 ext.2 with any questions, requests or comments.

Cable Routing

(XR15 only)

Need help?

Do you have a question about the Ecotech Marine RMS and is the answer not in the manual?

Summary

Select the correct spacer setup for rimmed or rimless tanks.

Attach the RMS assembly to the aquarium tank, with a warning against over-tightening.

Choose the correct sliding rail for the desired front-to-back positioning.

Insert and secure the X-Bracket assembly into the sliding rail with screws.

Mount the Radion light fixture onto the assembled X-Bracket.

Guide the sliding rail onto the formed arm and tighten the locking nut and screw.

General