Ecotech Acoem Serinus 30 - Rack Mount Kit

Optional Extras
Page 171
 Refer to Section 3.4.29, for details on the network menu.
 Refer to Section 4.3, for details on network setup.
8.2.1 Hardware Setup
This procedure will need to be followed after a factory reset.
Procedure
1. Press - (the green instrument status light button), to return to the home screen.
2. Press - (-99+) on the keypad toopen the Advanced Menu.
3. Open - Advanced Menu → Hardware Menu.
4. Enable - Network Port → Enabled.
8.3 Rack Mount Kit (PN: E020116)
The rack mount kit is necessary for installing the Serinus into a 19” rack (the Serinus is 4RU in height).
Table 10 – Included Parts (Rack Mount Kit)
Description
Quantity
Part Number
Rack Slide Set
1
H010112
Rack Mount Adaptors
4
H010133
Rack Mount Ears
2
H010134
Spacers
4
HAR-8700
M6 x 20 Button Head Screws
8
M6 Washers
16
M6 Nyloc Nuts
8
M4 x 10 Button Head Screws
18
M4 Washers
8
M4 Nyloc Nuts
8
M6 Cage Nuts
8
Installing the Instrument
1. Remove the rubber feet from the instrument (if attached).