Thus it becomes possible to turn on/off the alarm clock ringing at a time set in
advance. Successive short presses of the THRESHOLD button turn the alarm clock
on/off. Each press of the THRESHOLD button changes the alarm clock symbol
status. The highlighted unblinking alarm clock symbol shows that the alarm clock is
on, and the dark one shows that it is off.
Caution! If the submode of alarm clock activation time programming is paused
for more than 30 s (the user presses no buttons of the radiometer), the radiometer
will automatically return to the alarm clock mode. All changes made in the submode
of alarm clock activation time programming will be cancelled.
If the alarm clock is on, and the current time coincides with the alarm clock
activation time, the alarm clock will be activated and the radiometer will start
generating the alarm clock signal in all operating modes and submodes of the
radiometer, except for the submode of time and date correction. The alarm clock
symbol will be blinking at that. The alarm clock goes off even if the radiometer is
off.
To Next Page
Loading...
