Why does my ECOVACS GOAT G1-800 stop in the working area?
If your ECOVACS Lawn Mower stops within the working area, it might be due to the station or Navigation Beacon being moved. Return them to their original positions. Alternatively, the Navigation Beacon's battery might be depleted; replace the dry cell. If issues persist, try remapping the area.
What to do if ECOVACS GOAT G1-800 Lawn Mower fails to dock with the station?
If your ECOVACS Lawn Mower fails to dock with the station, ensure the station is properly connected to the power outlet; the indicator light should be solid blue. Also, verify that the Base connector is correctly connected to the Pile connector and that the station's reflective film isn't blocked. Clear any obstacles near the station to allow for proper docking.
Why ECOVACS GOAT G1-800 stops working and returns to the station?
If your ECOVACS Lawn Mower stops working and returns to the station, it could be due to the battery being too hot or too cold; allow the temperature to return to normal. It might also happen if the battery is low or the signal is weak; wait until the battery is fully charged and the signal is strong.
What to do if my ECOVACS Lawn Mower is trapped?
If your ECOVACS Lawn Mower is trapped or suspended, move it to a safe location and allow it to continue working. If relocation fails, place the mower into the station and restart it.
How to fix ECOVACS GOAT G1-800 failing to complete map learning?
If your ECOVACS Lawn Mower fails to complete the map learning, clear away any obstacles or hollows on the lawn and restart the map learning process. You may also need to adjust the Navigation Beacon's position according to the prompts in the app and remap the area.
General| Brand | ECOVACS |
|---|---|
| Model | GOAT G1-800 |
| Category | Lawn Mower |
| Language | English |
To Next Page
