POWER + CONNECT
Important: Maintaining
Waterproofness
Your EcoEdge+ is only
waterproof when the cap
is properly closed. In order
to properly close the cap,
push firmly to be sure the
cap fits flat and flush along
the edges with the panel.
If not properly closed the
unit is NOT watertight and
may not float.
The EcoConnect connection
between the two EcoEdge+
speakers will NOT automatically
re-connect after the speakers
are turned off. To re-establish
EcoConnect between the
speakers, after powering off,
please follow the above steps.
NOTE: The EcoConnect feature
works when paired to another
EcoConnect capable speaker
with a distance of up to 30ft
from each other. EcoConnect
only works when using
Bluetooth as your audio source.
To Next Page
Loading...
