Ecozy DW01 - Select Program and Start Washing

EN
Option 2: Add Water Manually
* This option is Юг the case you don't install the water inlet hose.
Open the сар оп the top о! the dishwasher, then fill the water о 1.3 Gal/5 L into the tank.
When there is enough water апа the dishwasher is ready to be used, it will beep.
7 13Gal(5L)
. ^
Tips:
@ No need to add water during the washing cycle.
@ Please close the сар after filling enough water.
@ It's forbidden to add detergent into the water tank directly,
@ Ifyou frequently add water with this option, please clean е water inlet opening regularly.
*A Guide to the Indicators о? &Э апа * оп the LCD Panel
Solid Whit
На enough water
Flash Red: Solid White:
Faucet not turned оп ог no enough water — Наз enough water
5. Select Program and Start Washing
Close the door and press the button @ to select а desired washing program, then press the button
() о чаг washing,
Please refer to the following chart for the details of each washing program.
12