Ecozy DW01 - Drain Hose Installation Steps

В
ЕМ
© Theinstallation position of the dishwasher should be near ап existing faucet if you choose to add
water automatically. One side оЁ the sink should be chosen to facilitate the connection of the drain
hose. If you choose to add water manually, other container is needed for draining water.
1. Drain Hose Installation
Step 1:
Connect опе епа (with "L" shape) о! the Water Drain Hose to the Water Outlet Connector, then screw
it tightly using the Hose Clamp.
* Screwdriver(not included)
* Make sure the hose s tightly fixed to avoid
water leakage.
Step 2:
Fix the other епа of the Water Drain Hose onto а sink ога bucket using the Suction Cup.
=] =]
Tips:
@ Ifyou don't want to connect the Water Drain Hose to the sink directly, you can also connect it
to a drain pipe ога drainage pipe а5 shown below:
06