EasyManua.ls Logo

ECR 4 Kids ELR-17102-A User Manual

ECR 4 Kids ELR-17102-A
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
A
Left/Right Side Panels (2)
Must be drilled to mount to wall
per individual installation application
Parts List
Top Panel (1)
Upper Rail (1)
Lower Rail (1)
Bottom Panel (1)
Back Panels (3)
Frame Wall Mount (1)
Wall Mount (1)
F
H Connector (2)
L
B
I
J
C
K
D
M
E
N O
G
H
Shelves
ELR-17100 = 2pcs
ELR-17101 = 3pcs
ELR-17102 = 4pcs
Short Hex Screws (6)
Cam Posts & Cam Locks (2/2)
M1 M2
A1 A2
Small Cam Posts
(4 per shelf)
Phillips Screws (6)
BEFORE ASSEMBLING, MAKE SURE YOU HAVE ALL THE PARTS
Long Hex Screws (10)
Batch ID Sticker
located on underside
Use the
Hex Tool
Use the
Hex Tool
Use a Phillips
Screwdriver
Use a Phillips
Screwdriver
Use a Phillips
Screwdriver
36”, 48” & 60” Book Case
ELR-17102-A ELR-17101-A ELR-17100-A
Adult Assembly Required.
Two adults recommended.
- Contains small parts, sharp points and edges.
- Do not stand, sit, kneel, climb, lean or pull on
unit for support.
- Never leave children unattended.
- Do not place unit near high heat or moisture.
- Adult supervision recommended.
WARNING:
TOOLS INCLUDED
Hex Tool (1)
TOOLS NEEDED
Phillips Screwdriver
Drill Driver
+ Drill Bits
San Diego, CA 92110 USA
www.ecr4kids.com
Children climbing on furniture
can lead to death or serious
injury due to tipping. Secure
unit to wall using appropriate
hardware.
Question and Answer IconNeed help?

Do you have a question about the ECR 4 Kids ELR-17102-A and is the answer not in the manual?

ECR 4 Kids ELR-17102-A Specifications

General IconGeneral
BrandECR 4 Kids
ModelELR-17102-A
CategoryIndoor Furnishing
LanguageEnglish

Summary

Assembly Steps

Attach Upper Rail to Top Panel

Install Cam Posts and Cam Locks to secure the Upper Rail to the Top Panel.

Install Lower Rail to Bottom Panel

Attach the Lower Rail to the Bottom Panel using Long Hex Screws, ensuring channels face the back.

Install Left Side Panel

Attach the Left Side Panel to the Top and Bottom Panels using Long Hex Screws.

Insert Back Panels

Slide Back Panels into grooves, securing with H Connectors and ensuring small holes are at the bottom.

Insert Frame Wall Mount

Insert the Frame Wall Mount dowels into the Left Side Panel and Top Panel.

Attach Right Side Panel

Secure the Right Side Panel to the Top and Bottom Panels with Long Hex Screws.

Install Back Panel Screws

Fasten Back Panels using Short Hex Screws and Short Phillips Screws.

Attach Shelves

Install Small Cam Posts and lock Shelves using Shelf Cam Locks.

Install Wall Mount

Secure the Wall Mount to wall studs for safety, consulting professionals if needed.

Product Information and Care

Care and Cleaning Instructions

Clean wood with a damp cloth and mild soap; avoid heat and moisture.

Customer Support and Warranty

Contact ECR4KIDS for assistance, replacement parts, or warranty information.

Tip-Over Prevention

Install anchoring devices to prevent furniture tipping, especially for children.

Related product manuals