49
Using BIOS
B.O.M.P Technology (Enabled)
This item allows users to enable or disable B.O.M.P technology. This function can
run safe setting to setup menu when system boot fail 3 times.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
DIMM Voltage (Disabled)
This item allows users to adjust the DIMM voltage.
CPU Voltage (Disabled)
This item allows users to adjust the CPU voltage.
IMC Voltage (Disabled)
This item allows users to adjust the IMC voltage.
Intel(R) Core(TM) i5-2300 CPU @ 2.80 GHz
This is display-only field and displays the information of the CPU installed in your
computer.
Processor Speed (2800MHz)
This item shows the CPU speed.
Total Memory (2048MB(DDR3 1333))
This item shows the total momery of DDR3.
RAS# to CAS# Delay(tRD) (9)
This item specifies the RAS# to CAS# delay to Rd/Wr command to the same bank.
RAS# Active Time(tRAS) (24)
This item specifies the RAS# active time.
Intel Graphics Configuration
This item shows the information of Intel Graphics Configuration.
GT OverClocking [Disabled]
This item allows you to control the internal GFX Turbo mode.
Press <Esc> to return to the Performance Tunning page.
Press <Esc> to return to the M.I.B III menu page.
Row Precharge Time(tRP) (9)
This item specifies Row precharge to Active or Auto-Refresh of the same bank.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Command Rate (Auto)
This item allows users to set command rate.
To Next Page
Loading...
Need help?
General
