ECTIVE MI Series - Accessory; Intended use

[
ECTIVE
®
POWER INVERTER – MI-/TMI-SERIES
]
29
Accessory
Number Designation
1 unit Remote K01***
1 unit Remote KS02****
1 unit 3m RJ12 remote cable
*** suitable for model from MI150-series
**** suitable for model from TMI150-series
Intended use
ѥ Warning!
Fire hazard!
The ECTIVE
®
inverter of the MI/TMI-series are generally build for so called “Off-Grid”-
Systems and should only be used autonomously. Do not connect the inverter output
(socket) with an other voltage source. All models with a mains priority circuit should be
connected with a power supply only through the provided AC-input. Disregarding this
advice is life threatening and will destroy the inverter immediately.
⚠ Caution!
The inverter should not be used in vehicles, in which the +pole is connected to the
chassis.
⚠ Caution!
Please mind the input voltage!
The inverter should only be connected to voltage sources which correspond to follow-
ing provisions. 12 V=12 V, 24 V= 24 V
If connected to a higher voltage source the fuse can immediately blow and destroy the
inverter.