ECTIVE SI Series User Manual

ECTIVE SI & TSI Series 33
Intended use
Warning!
Fire hazard!
The ECTIVE inverter of the SI/TSI-series are generally build for so called “Off-Grid”-Sys-
tems and should only be used autonomously. Do not connect the inverter output (socket)
with an other voltage source. All models with a mains priority circuit should be connected
with a power supply only through the provided AC-input. Disregarding this advice is life
threatening and will destroy the inverter immediately.
Caution!
The inverter should not be used in vehicles, in which the +pole is connected to the
chassis!
Caution!
Please mind the input voltage!
The inverter should only be connected to voltage sources which correspond to following
provisions. 12 V=12 V, 24 V= 24 V
If connected to a higher voltage source the fuse can immediately blow and destroy the
inverter.

ECTIVE SI Series Specifications

General

Waveform	Pure Sine Wave
Efficiency	>90%
USB Output	5V/2.1A
Input Voltage	12V / 24V / 48V DC (depending on the model)
Output Frequency	50Hz
Protection Features	Overload, overvoltage, overtemperature, short circuit
Cooling	Fan
Dimensions	Varies depending on the model.
Weight	Varies depending on the model.