H100N Pulse Oximeter User Manual Oximeter Operation
- 61 -
the lower limit of PR Alarm is from 0 to “the upper limit
of PR Alarm – 1”.
Press the Function button, confirm the alarm range
setup.
Hi Alarm is always higher than Lo Alarm by at
least 1 bpm.
Press the On/Off button to exit the menu, and
return to measurement state.
3.3.12 Temp Alarm Setup
The user can use Temp Hi Alarm and Temp Lo Alarm
in menu to adjust body temperature alarm limits.
By default, the Temp Hi Alarm and Temp Lo Alarm
are set to 39.0℃ and 36.0℃respectively in both Neo and
Adu modes.
Set the Temp limits as follows:
Choose Temp Hi Alarm in the menu, press the
To Next Page
Loading...
