FlexTILT Head is recommended as a tripod head solution for SliderONE.
Adjust the center of gravity to
-Pan/tilt easily,
-Change the height of the camera easily.
If there is play in your SliderONE’s carriage, follow these steps to improve the
issue.
Loosen the screws.
Gently push from both sides as shown by the arrows.
Tighten screws while pushing from the sides.
1.
2.
3.
4. USING WITH FLEXTILT HEAD
A detailed video explaining how to operate the SliderONE can be found from :
manuals.edelkrone.com
A detailed video explaining how to use the FlexTILT Head with SliderONE can be
found at: manuals.edelkrone.com
5. ADJUSTING SLIDERONE
To Next Page
Loading...