Need help?Do you have a question about the Edesa LE61IT and is the answer not in the manual?
General| Brand | Edesa |
|---|---|
| Model | LE61IT |
| Category | Dishwasher |
| Language | English |
Process of removing protection elements and checking the specification label on the door.
Connecting the water inlet and drain outlet pipes securely to the appliance.
Connecting the dishwasher to an earthed plug socket, checking voltage and power supply.
Adjusting the dishwasher legs and positioning for installation.
Fitting plastic protection for wooden worktops and front brackets for fixing.
Adjusting the dishwasher legs to achieve correct height and level for flush mounting.
Attaching the appliance door panel using templates and ensuring correct alignment.
Running a prewash program to check installation and clean the interior before first use.
Adjusting water hardness, controlling salt level, and using rinse-aid and detergent.
Manual and electronic methods for setting the salt regulator based on water hardness.
Indications for refilling salt and procedure for filling the salt container.
Function of rinse-aid and adjusting the dispenser for optimal drying performance.
Pilot light indicator for refilling rinse-aid and filling the dispenser.
Pouring detergent into the container, types of detergent, and extra detergent placement.
Identifying which utensils are suitable and unsuitable for dishwasher washing.
Guidelines for correctly loading the dishwasher racks for optimal wash results.
Correct placement of cutlery, cups, glasses, and plates in the racks.
Adjusting the top rack height without removing it from the rails.
Removing and repositioning the top rack at the desired height.
Procedure for selecting wash programs using ON/OFF, PROG buttons and understanding display indicators.
Overview of different wash programs, their symbols, temperatures, detergent amounts, and duration.
Delaying the start of the wash program for 1 to 19 hours.
Using half capacity, selecting top or bottom rack for specific utensils.
Washing half a load exclusively in the top rack.
Closing the door after selecting program and functions to start automatically.
Procedure for pausing the program to add utensils or change the wash program.
Indication of program completion via beep and pilot light.
Dishwasher continues operation from where it stopped after a power cut.
Tips for maximizing dishwasher capacity to reduce consumption and improve efficiency.
Ensuring proper placement of dishes for optimal wash quality and free sprinkler rotation.
Selecting the correct wash program and additional functions for the load.
Cleaning filters and sprinklers every three months and ensuring correct reassembly.
Detailed steps for removing and cleaning the interior, exterior filters, and filter protector.
Instructions for removing and cleaning the third, upper, and lower spray arms.
Cleaning the dishwasher interior and exterior using appropriate cleaning agents.
Identifying malfunctions via error codes (F1-F9) or beep patterns.
Troubleshooting steps for common issues preventing the dishwasher from starting.
Diagnosing issues with no water entering the appliance, including tap and inlet valve filter.
Troubleshooting drainage problems related to blockages, kinks, or incomplete programs.
Reasons for the salt indicator light remaining on, including low salt or water hardness.
Troubleshooting detergent dispenser issues and identifying causes of unusual foam.
Addressing strange noises and high salt consumption in the dishwasher.
Troubleshooting food residue, white film, poor drying, and dull appearance on utensils.
Troubleshooting white film on utensils, related to detergent, salt, or rinse-aid levels.
Troubleshooting drying issues, checking rinse-aid, utensil positioning, and program selection.
Addressing issues with glassware appearance and staining on stainless steel items.
Guidelines for environmentally friendly disposal of the appliance at the end of its service life.
To Next Page
