EDIFIER T5 User Manual

2
English
Important safety instruction
This symbol is to alert the user to the presence of un-insulated dangerous voltage within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is to warn the user not to disassemble the enclosure of the product and there is no user-replaceable
part inside. Take the product to an authorized service center for repair.
This symbol indicates that the product is for indoor use only.
This symbol indicates that the product is a CLASS II or double insulated electrical device with no earth requirement.
Power warning:
1. Place the product near the power outlet for easy use.
2. Before use, make sure that the operating voltage is the same as your local power supply. Correct operating voltage can
be found on the product plate.
3. For safety purpose, unplug the product during lightning storms or when unused for extended periods of time.
4. Under normal conditions, the power supply may get hot. Please keep good ventilation in the area and exercise caution.
5. Safety warning labels on the housing or bottom of the product or power adaptor.
The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.

EDIFIER T5 Specifications

General

Subwoofer type	Active subwoofer
Low pass filter	Yes
Input sensitivity	50 mV
Subwoofer sensitivity	85 dB
Subwoofer frequency range	38 - 200 Hz
Subwoofer driver diameter (imperial)	8 \
Material	MDF
Product color	Black
AC input voltage	100 - 240 V

Weight and Dimensions

Subwoofer depth	300 mm
Subwoofer width	278 mm
Subwoofer height	336 mm
Subwoofer weight	13000 g