EDIFIER T5 User Manual

8
English
Specifications / Troubleshooting
Power output: 70W
Frequency response: 38Hz-200Hz
There is no restriction of use.
Troubleshooting
To learn more about EDIFIER, please visit www.edifier.com
For Edifier warranty queries, please visit the relevant country page on www.edifier.com and review the section titled
Warranty Terms.
USA and Canada: service@edifier.ca
South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact
information.
No sound
1. Ensure audio source is playing and all cables are firmly connected.
2. Ensure signal output of audio source is set correctly.
3. Check the volume levels on speakers and audio source player.
4. Please turn speakers off and restart them.
Noise coming from speakers
Edifier speakers generate little noise, while the background noise of some audio devices are too high. Please unplug
audio cables and turn the volume up, if no sound can be heard at 1 meter away from the speaker, then there is no
problem with this product.

EDIFIER T5 Specifications

General

Subwoofer type	Active subwoofer
Low pass filter	Yes
Input sensitivity	50 mV
Subwoofer sensitivity	85 dB
Subwoofer frequency range	38 - 200 Hz
Subwoofer driver diameter (imperial)	8 \
Material	MDF
Product color	Black
AC input voltage	100 - 240 V

Weight and Dimensions

Subwoofer depth	300 mm
Subwoofer width	278 mm
Subwoofer height	336 mm
Subwoofer weight	13000 g