11. Select your Internet connection type
and click “Next”. If you are a dynamic IP
user, then select “Cable Modem”. For
most users, “Cable Modem” is the
correct setting. If you are unsure, please
contact your Internet Service Provider
(ISP).
12. If you received a host name and MAC
address from your ISP, enter them here
and click “Apply”. If you are sure the
MAC address is the same as your
computer, you can click “Clone” to
clone your computer’s MAC address
and then click “Apply” to continue.
13. Please wait while the router connects
to the Internet.
To Next Page
Loading...
Need help?
General
