Edimax CV-7428nS User Manual

6
I-4. Rear Panel
a. Antenna
Fixed dipole antenna.
b. 10/100M LAN Ports
Connect computers or other network devices to these ports using an
Ethernet cable.
c. Power Port
Connect the included 5V DC power adapter here.
d. WPS/Reset Button
Press and hold this button for 2 seconds to activate the WPS function. Press
and hold this button for 10 seconds, until the PWR LED starts flashing, to
reset the wireless bridge to factory default settings.
I-5. Safety Information
In order to ensure the safe operation of the device and its users, please read
and act in accordance with the following safety instructions.
1. The wireless bridge is designed for indoor use only; do not place the
wireless bridge outdoors.
2. Do not place the wireless bridge in or near hot/humid places, such as a
(a) Antenna
(1 of 2)
(b) LAN Ports
(c) Power Port
(d) WPS/Reset
Button
(a) Antenna
(2 of 2)

Edimax CV-7428nS Specifications

Power

power adapter voltage	DC 5V
power adapter current	1A

Operating Environment

humidity	10-90% (Non-condensing)
temperature range	0-40°C
temperature range in Fahrenheit	32 - 104°F

Wireless Standards

frequency band	2.4 GHz
IEEE 802.11n data rate	up to 300Mbps
IEEE 802.11g data rate	up to 54Mbps
IEEE 802.11b data rate	up to 11Mbps

Ports & Interfaces

LAN ports	5 x RJ-45
antenna type	2 x 2dBi external antennas
LED indicators	Power, Wireless, LAN ports

Weight and Dimensions

weight	155 grams
height	30 mm
width	127 mm
depth	96 mm