Media Converter
Media Converter
ET-913 Series
Media Converter
Media Converter
-
-
G
G
1000Base
1000Base
-
-
T To 1000Base
T To 1000Base
-
-
SX/LX Media Converter
SX/LX Media Converter
Best media conversion solutions for network connectivity
Edimax’s full series of Media Converter are designed to meet the needs for
massive optical fiber network, provide the whole Gigabit Ethernet network
implementation.
Migrating between copper and fiber-based Medium
ET-913 series convert the signals between two different transmission medium,
allowing user a simple and cost-effective method to migrate between UTP cable
and fiber optic cable. It can transmit signals up to 550m (multimode) and
10/20/30/60km (single-mode) in fiber medium, allowing users to extend network.
Comply with IEEE Standards
ET-913 series are fully compliant with IEEE 802.3ab 1000Base-T and 802.3z
1000Base-SX/LX standards. The device comes with one RJ-45 port to connect to
a 1000Base-T device such as workstation or switch and one fiber connection to
connect a 1000Base-SX/LX device.
Feature LED and Fiber link alarm
User could monitor the device through Feature LED. In addition, Fiber Link Alarm
could allow user to monitor and maintain their critical fiber link more effectively.
Unique voltage supervisor
Built in voltage supervisor IC will automatically reset all chipsets in converter as
power voltage drop below 2.9V, this action can make sure fiber port and TP port
work normally when thunder storm or power unstable occurring cause the power
electricity suddenly down in an instant time.
Plug-and-Play Installation
Simply to plug the TP and fiber port to the device having the media convertibility.
To Next Page
Need help?
General
