Enter a name for the QoS rule for
reference/identification.
Set the bandwidth limits for the QoS rule:
(1) (2) (3)
1. Select “Download” or “Upload” for the
QoS rule.
2. Enter the bandwidth limit.
3. Select whether the bandwidth is a
“Guarantee” (minimum) or “Max”
(maximum).
Enter the IP address range to which the QoS
rule will be applied.
Enter a starting IP address in the left field
and the end IP address in the right field to
define a range of IP addresses; or enter an IP
address in the left field only to define a single
IP address.
To Next Page
Loading...
Need help?
General
