25
6.5 Advanced
The “Advanced” option enables you to configure more advanced settings, for example: Power Save,
Turbo Mode, Wireless Mode and etc.
Parameter Description
Power Save None – The adapter will always set in active mode.
Min – Enable the adapter in the power saving mode when it is
idle, but some components of the adapter are still alive. In this
mode, the power consumption is larger than “Max“ mode.
Max – Enable the adapter in the power saving mode when it is
idle.
Turbo Mode Off – Turn off the turbo mode.
On – Turn on the turbo mode.
Auto – The adapter will detect the AP is RTL8186-based AP or
not to transmit data in turbo mode automatically.
Wireless Mode 802.11 b – This adapter can be compatible with both 802.11g and
802.11b wireless stations. If there are only 802.11b wireless
stations in the network, you can set the adapter to this mode.
802.11 g/b – If you have a mix of 802.11b and 802.11g wireless
stations in your network, it is recommended to setting the adapter
To Next Page
Loading...
Need help?
General