30
VI-3-5. Information
The “Information” screen displays various information such as wireless utility
version and driver version.
VI-4. WPS Setup
If your wireless router/access point supports Wi-Fi Protected Setup (WPS)
then you can use this method to connect to a Wi-Fi network.
1. Press the WPS button (often the WPS/Reset button) on
your router/access point to activate WPS.
Please check the instructions for your wireless router/access
point for how long you need to hold down its WPS button to
activate WPS.
2. Within two minutes, press the WPS button on
the EW-7722UTn V2/EW-7612UAn V2 to activate its WPS.
3. The devices will establish a connection.
To Next Page
Loading...
Need help?
General
