21
3.3 General
To check the connection status of the adapter, select “General“. This screen shows
the information of Link Speed, Network Type, Encryption Method, SSID, Signal
Strength, Link Quality and Network Address of the adapter.
Infrastructure – This operation mode requires the
presence of an 802.11 Access Point. All
communication is done via the Access Point or Router.
IBSS – Select this mode if you want to connect to
another wireless stations in the Wireless LAN network
without through an Access Point or Router.
IBSS – Select this mode if you want to connect to
another wireless stations in the Wireless LAN network
without through an Access Point or Router.
To Next Page
Loading...
Need help?
General
