38
Please note that Ad-Hoc mode is not available when network card is in AP mode. The
description of major setup items are listed below:
Please input the SSID (the name used to identify this
wireless access point) here. Up to 32 numerical
characters can be accepted here, excepting space.
Please select the wireless channel you wish to use,
from 1 to 13.
To save changes, click „OK‟; otherwise click „Cancel‟ to leave this menu and keep
settings untouched.
To setup security options for Soft-AP, configure „Wireless Network Security‟ section as
follow:
The description of setup items about wireless security are listed below:
Select network authentication mode from dropdown
menu.
Select data encryption method from dropdown
To Next Page
Loading...
Need help?
General
