40
3.8.2 AP Advanced
If you want to setup advanced settings of software access point, select „Advanced‟
menu. If you don‟t know the meaning and affects of these settings, keep them
untouched.
Beacon Interval that specifies the duration between
beacon packets (milliseconds). The range for the
beacon period is between 20-1000 milliseconds with a
typical value of 100.
Determines the interval the Access Point will send its
broadcast traffic. Default value is 3 beacons.
The preamble defines the length of the CRC block for
communication among the wireless stations. There are
two mode including Long and Short. High network
traffic areas should use the shorter preamble type.
Set the setting values return to defaults.
Confirm the settings in the “Advanced“.
To Next Page
Loading...
Need help?
General
