EDP Wasp User Manual

Adjust pitch bend and glide effect for expressive playing.

Adjust tuning reference (A=440) and keyboard touch sensitivity.

Choose 32' to 2' octave range and sawtooth/square waveform.

Select waveform and adjust pitch interval between oscillators.

Adjust LFO frequency and modulate oscillator pitch.

Choose sine, sawtooth, square, or noise for modulation.

Manually adjust filter cutoff frequency and resonance ('Q').

Control filter frequency with LFO or envelope generator.

Control volume dynamics with attack, decay, and sustain.

Modulate filter or other parameters with a separate envelope.

Control master volume and power the unit on/off.

Use line out, phones jack, and link sockets for audio and chaining.

Information on using batteries, power consumption, and battery life.