22
MAINTENANCE
Gear Housing
There is a grease nipple and a plug for filling lubricant on the gear
housing
(Fig.46). Use a grease gun to fill with grease. This should
be done after every 15-20 working hours.
CAUTION: The gear housing must not be filled com-
pletely with grease. The grease expands as the
machine heats up during operation. If the gear hou-
sing was completely filled with grease it could dama-
ge the seals and lead to leakage of grease.
The grease in the bevel gear does not normally need to be chan-
ged except if repairs are carried out.
î
46
en
Efco TG2600 Inglese 29-03-2007 14:21 Pagina 22
To Next Page
Loading...
