4
3
1
2
A C
38
The data and features referred to are not binding on EFFEGIBI and the company reserves the right to make any appropriate changes without having to give prior warning or replace this manual.
OPERATING AND MAINTENANCE MANUAL FOR AQUASTEAM,
AQUASTEAM MAXI, EASYSTEAM
EN
fig. C
The “ON/OFF” button (shown in fig. B as number “3”) will start to ash.
Now hold down the “HAMMAM/TURKISH BATH” button for at least 5 seconds (shown in fig. D as number
“4”) until it starts ashing.
The button will ash for a few minutes.
During this phase the generator is recognising all the additional features installed.
When the recognition phase is complete, the “HAMMAM/TURKISH BATH” button shown in fig. D, as number
4) will stop ashing, but remain lit and the “ON/OFF” button will start ashing again.
Press the “ON/OFF” button as shown in fig. E: the panel will exit from the technical menu. Press the “ON/OFF”
button again to complete the start-up sequence, after which your generator will be ready to use.
fig. E
fig. D
uso as.indd 38 18/03/2014 16:36:15
To Next Page
Loading...
