8
3.4 GUIDE TO DETECT OPERATION PROBLEMS
Make sure that the plug, fuse and wall
plug work correctly.
The machine
doesn´t reach the
set temperature
The unit is located in a hot
place.
There´s no enough air
passing through the
condenser.
The air intake openings
are blocked by product.
Change the location of the unit or remove
the heat source.
Check the minimum distances (see point
3.1.4).
Remove the product that is blocking the
air openings.
In case any other incidence, please contact your local service partner.
4. DISPOSAL
WARNING: Thermal insulation material is POLYURETHANE.
Never dispose appliance in the normal household rubbish.
These symbols on the products, packaging, and/or accompanying documents mean that used
electrical and electronic products and batteries should not be mixed with general household waste. For
proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation and the Directives 2014/30/UE
and 2014/35/UE.
Note: The manufacturer saves himself the right to do modifications without previous notice.
To Next Page
Loading...