SUN SHADE — AMS10008
16. Place the vinyl canopy on top of the supporting frame, first fitting the back of the vinyl canopy around the curved
tubes of the frame, then fitting the front of the vinyl canopy around the front end of the frame. Make sure the mesh
screen of the vinyl canopy is on the outside of the supporting tube. Secure the mesh screen to the supporting frame
and supporting tube in place using six hook and loop fasteners of the mesh (Fig. 9).
CAUTION: Make sure the mower seat can slide freely after attaching the sun shade.
9
Vinyl Canopy
Hook and Loop
Mesh Screen
Supporting Frame
Supporting Tube
Curved Tube
Front End
To Next Page
Loading...
